glass reactor 50L(PTFE sealing)

Detailed Product Description

1. volume:1L 2L 3L 5L 10L 20L 30L 50L 100L

2. Reacting tem:-80~300

3. GG17, SS,PTFE sealing

4.University brand designated

glass reactor

1. volume:1L 2L 3L 5L 10L 20L 30L 50L 80L 100L

2. Reacting tem:-80°C~300°C

3. GG17, SS,PTFE sealing

4. University brands designated

5. Reflow and distillation system

Glass vacuum reactor is with double glass design, the inner layer placed reaction solvent can do the mixing reaction, the inter layer can be added with the different hot and cold sources (frozen liquid, hot water or hot oil) to do loop heating or cooling reaction. Under the conditions of constant temperature setting, the mixing reaction can be carried on inside the sealed glass reactor according to requirements under the conditions of atmospheric pressure or negative pressure, and the reflux and distillation of the reaction solution can also be done, it is the ideal pilot and production equipment of modern fine chemical plant, biological pharmacy and synthesis of new materials.

The double-layer glass reactor of the company is the essence of the domestic similar products, with recommendations and experiences of all use customers, it has already been formed 1L, 2L, 3L, 5L,XBM 10L, 20L, 30L ,50L and 100L series, the product design follows the efficient, practical and economic principles, all are for the users.

the special properties of glass reactors

1. glass reactor adopts AC frequency control of motor speed So the rev is steady , no spark appear, wide moment, safe.

2. glass reactor system use PTFE composite seal, it can maintain high vacuum degree.

3. glass reactor system use efficient condenser to ensure high recovery rate.

4. The complete set of double-layer glass use GG17 high borosilicate glass with good chemical and physical properties. The thickness of the glass is 5-7 mm with good chemical and physical properties

5. The glass inter layer interface is added with hot oil, through the loop, it can do reaction under the condition of high temperature; the glass inter layer interface added with cooling fluid can carry on reaction under the condition of low-temperature.

6. the double-layer glass reactor system can be added with tap water to quickly take away reaction heat.

7. Double-layer glass reactor discharged material has flanged opening and PTFE valve, without dead angle inside the container, it can be demounted to facilitate the discharge of solid materials.

8. Double-layer glass reactor have digital mixing motor, frequency conversion control, matched with a torque increasing of reducer.

9. Double-layer glass reactor system reasonable structure and selected materials. The mechanical components use stainless steel and aluminum-alloy pieces, the glass pieces use high borosilicate glass with high temperature resistance and good chemical properties. Electrical components parts: the main components use original imported devices.

10. Double-layer glass reactor’s cover opening design: constant pressure hopper opening (or as inlet), condensation reflux inlet, thermometer bushing opening, solid feeding opening (or as outlet) and mixing opening.

11. the range of glass reactor stirring rate is 10-1100 r/min.

12. The gas can be condensed through condenser system.,or release valve.

13. control its pressure inside, by vacuum pump or pressure pump. But the price of pump is additional. Now , the glass reactor was had a pressure gauge, can display the pressure value, but there is no way to charge into the positive pressure or negative pressure, but only display pressure.

14. Our glass reactor is thermoresistant material. Glass material is G3.3, and extreme temperatures: low temperature to -80°Cand high temperature to 300°C..

15. . This glass reactor has a heating jacket for oils, water to go through and heat.

The function of glass reactors system

The double-layer glass reactor system realizes “one reactor severs several purposes” in the experiment, satisfying diversify of aspects of different tests. It can be used for the following reactions:

1. Vacuum stirring reaction

2. High-temperature and low-temperature reaction

3. Constant speed running mixing reaction
4. Distillation , refluence and condensation reaction.
5. To do the rectify through assembling the rectifying pillar. Realize Reflow and distillation.

type

volume

(L)

Motor power

(W)

Speed

(r/min)

Stirring torque(1300r/min)

Inside/outside tube diameter

(mm)

Reactor vessel cover relevant opening size

center

left

right

later

before

BL-100L

100

250

10-680

22000g.cm

460*500

50#

40#

34#

34#

29#

BL-80L

80

250

22000g.cm

460*500

50#

40#

34#

34#

29#

BL-50L

50

180

15000g.cm

360*405

50#

40#

34#

34#

29#

BL-30L

30

180

15000g.cm

315*360

50#

40#

34#

34#

29#

BL-20L

20

120

7200g.cm

315*360

50#

40#

34#

34#

29#

BL-10L

10

120

7200.g.cm

245*260

50#

40#

34#

34#

29#

Contact person:cassie ai

E-mail: xbzg.com@gmail.com

Tel: 0086-371-67996871 0086-371-67996872

WEB:Flotation machine: http://www.xbzg.com/Product/beneficiations/28.html
ball mill: http://www.xbzg.com/Product/grinder_mills/38.html
ball mill: http://www.xbzg.com/Product/grinder_mills/39.html
ball mill: http://www.xingbangmills.com

Tags: , ,